Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
Chemglass Life Sciences Tubing, Silicone, Peroxide-Cured Silcon, Size 26, 1/4" ID x 1/2" OD x 1/8" Wall Thickness x 50' Long
Peroxide-cured Silicone Tubing is designed for use in applications where flexibility, resiliency and durability are required.Its inner smooth surface reduces the risk of particulate entrapment and microscopic buildup during fluid transfer. Tubing is FDA food grade compliant, entirely non-toxic, non-hemolytic and non-pyrogenic.It also meets 3-A Sanitary Standards, FDA 21 CFR Part 177. 2600 Criteria and NSF 51 Standard.Withstands temperature extremes from -100F to 500F (350F maximum for NSF applications). May be low pressure steam sterilized in-line or autoclaved at up to 121C in a normal autoclaving cycle.May be sterilized repeatedly but if tubing becomes relaxed or gummy it should be replaced.Sold in standard lengths of 50ft.
Grainger 100 ft. Yellow Nylon Tubing, 1/4" Outside Dia., 11/64" Inside Dia
100 ft. Yellow Nylon Tubing, 1/4" Outside Dia., 11/64" Inside Diameter. Max. Pressure 400 psi @ 68 Degrees F.
Chemglass Life Sciences Tubing, Silicone, Peroxide-Cured Silcon, Size 16, 1/8" ID x 1/4" OD x 1/16" Wall Thickness x 50' Long
Peroxide-cured Silicone Tubing is designed for use in applications where flexibility, resiliency and durability are required.Its inner smooth surface reduces the risk of particulate entrapment and microscopic buildup during fluid transfer. Tubing is FDA food grade compliant, entirely non-toxic, non-hemolytic and non-pyrogenic.It also meets 3-A Sanitary Standards, FDA 21 CFR Part 177. 2600 Criteria and NSF 51 Standard.Withstands temperature extremes from -100F to 500F (350F maximum for NSF applications). May be low pressure steam sterilized in-line or autoclaved at up to 121C in a normal autoclaving cycle.May be sterilized repeatedly but if tubing becomes relaxed or gummy it should be replaced.Sold in standard lengths of 50ft.
Grainger Hose Extension 36 in L
The Lincoln 36" Hose Extension is a rubber hose designed to extend the reach of an existing hose. It has a 3/4" inner diameter and is made of heavy duty rubber reinforced with a wire coil. The hose has machined brass couplings and is rated for 300 PSI working pressure. It can handle temperatures from -40°F to 150°F. The hose measures 36" long when fully extended and weighs approximately 2 lbs. It is manufactured in the USA by Lincoln Industrial Corp. This hose extension allows you to easily join two hoses together to increase your hose length.
Braintree Scientific Polyethylene .023"""" x .038"""" Per Ft.,200 ft. Continuous
Polyethylene Tubing Polyethylene is a relatively rigid polymer suitable for short-term catheterizations and for ex vivo applications. Polyethylene sleeves can be slipped over less rigid catheter materials (MicroRenathane, RenaSil™) at suture points to protect the latter from inadvertent constriction **Sold for research purposes only and not for human use**
